Eibach PRO-TRUCK COILOVER 2.0 Front Pair
E86-82-071-01-20 supplies preassembled front spring-and-damper units with threaded spring-perch adjustment for the 2010–2024 Toyota 4Runner 2WD/4WD. The extended-travel monotube design and variable-force valving are intended to provide road control and trail compliance.
Application information
Fits 2010–2024 Toyota 4Runner 2WD/RWD and 4WD. Confirm factory suspension equipment and any vehicle-specific installation requirements before ordering, particularly TRD Pro or X-REAS configurations. Model-year coverage does not by itself establish special-suspension conversion requirements.
Included components and adjustment
- Two front Coilover 2.0 assemblies, 82117.9003, identified in exact-part instructions D3880 Rev 2. A numerical total front lift range is not stated in the reviewed information.
- One height-adjustment tool, ETCO 2.0
Sold as a front pair, not a complete front-and-rear system. Rear shocks, rear springs and rear lift components are not listed in D3880's packing list.
The existing listing states that the shipped front setting is intended to level with the original rear spring. Additional preload is needed to level with an Eibach rear spring. This setup reference is not a guaranteed numerical lift height.
D3880 limits spring collar height to 99mm, measured from the bottom of the collar to the base as illustrated on page 8. This measurement is not vehicle lift. Exceeding the limit can damage the shock and suspension. Each full collar turn changes ride height by approximately 1/8 inch.
Construction and features
- Preassembled direct-replacement front coilovers, sold in pairs
- Threaded adjustable spring perches and ERO off-road race springs
- Anodized 6061-T6 billet aluminum mounts
- 46mm pistons and nitrogen-filled monotube variable-force damping
- Individually dyno-tested dampers and cycle-tested heavy-duty bushings
- Engineered, tested and manufactured by Eibach in the USA, as stated in the existing listing
Installation
Use the complete D3880 instructions for safe removal, installation, fastener torque, sway-bar work and clearance checks. Eibach specifies installation by qualified mechanics experienced with suspension components. Do not substitute adjustment limits from a different coilover kit.
D3880 exact-part contents, installation and collar-height limit